Runway & Taxiway Markings Quiz

11 October 2020, 18:41

Please do not forget to share with your friends for the continuation of the quizzes. Sharing it with your friends will be the greatest support for us.


#1. These markings are located at points along low visibility taxi routes designated in the airport’s Surface Movement Guidance Control System (SMGCS) plan. Pick the correct marking according to the definition.

#2. They delineate the edges of the runway. They provide a visual contrast between runway and the abutting terrain or shoulders.

#3. It comes in two configurations. They either consist of eight longitudinal stripes of uniform dimensions disposed symmetrically about the runway centerline or the number of stripes is related to the runway width.

#4. Which marking is given in the picture?

#5. These two rectangular markings consist of a broad white stripe located on each side of the runway centerline and approximately 1,000 feet from the landing threshold.

#6. They identify the area for landing operations and are coded to provide distance information in 500 feet (150m) increments.

#7. Which marking is given in the picture?

#8. They may be used to identify pavement areas contiguous to the runway sides that are not intended for use by aircraft.

#9. Which marking could be a good example for Runway Aiming Point Marking?

#10. Delineate displaced runway thresholds from unusable pavement such as blast pads, stopways, or taxiways that precede the threshold.



    Havis says:

    Good question

Leave a Reply

Your email address will not be published. Required fields are marked *